- Detection zoneAlerts when a tag on an unpaid item passes through
- PedestalsThe number depends on your entrance width
- AlarmSound and light
- PanelThe center panel can hold a poster (optional)
- BaseThe electronics sit inside the pedestal
Anti-theft gate
A pedestal gate that stands at your store entrance. When an unpaid item passes through, it sounds and lights up. We match it to the technology of the tags and labels you use in store.
- AM58kHzDetects reliably even near metal or foil packaging
- RF8.2MHzUses thin paper labels
- RFIDUHFYour inventory labels cover anti-theft too
- Fits your entrance
- We set the number and spacing of pedestals to suit your entrance width and number of doors.
- RFID combo
- Choose RFID and the labels you use for inventory cover anti-theft too. Works with RFID-X sewn-in labels as well.
- Installation and training
- After installation, we check the alarms and train your staff.
Where it's installed
Apparel & accessories store entrancesHard tags on garments and bags, labels on packaged goods, all covered by one gate.
Supermarket & large store entrancesWide entrances take several pedestals. Packaged goods carry EAS labels.
Warehouse & dispatch doorsWith RFID, it also reads carton quantities as they pass through the dispatch door.
Specifications
- Products
- Anti-theft gate (pedestal type)
- Technology
- AM, RF or RFID, chosen to match your store's tags. Combined RF and RFID models are also available
- Configuration
- Number and spacing of pedestals set to your entrance width
- Detection width
- RFID pedestals: 0.8–1.5m (up to 2.2m), per the manufacturer. Actual width is measured on site
- Alarm
- Sound and light
- Electronics
- Housed in the pedestal, with wireless sync when several pairs are installed
- Setup and diagnostics
- Set up and checked via software or an app
- Materials
- Aluminum frame, acrylic (depending on model)
- Installation
- Fixed to the floor and connected to power, with under-floor wiring or a surface cable cover
- Options
- Remote management, people counting, poster panel
- Used with
- Hard tags, EAS labels, tag detachers, label deactivators
For RFID: RFID labels, RFID-X sewn-in labels
Specifications are the manufacturer's data for the products we plan to supply. The model may change to suit your store, and performance figures are as stated by the manufacturer.
Works with
All products →
Frequently asked questions
I already use labels. Can I replace just the gate?
Yes, as long as the gate and labels use the same technology. Send us the tags or labels you use and we'll choose a gate to match. Our guide “AM, RF or RFID: which anti-theft system fits your store?” sets out which stores suit each technology.
What if my entrance is wide?
We add pedestals to split it into detection zones. Send a photo of the entrance and its width, and we'll suggest a setup.
Does it need floor work?
Cables can run under the floor, or across the surface under a cover. We'll decide with you after seeing your floor.
Can I use it with RFID inventory management?
Yes. RFID gates read the same UHF labels you use for inventory, so they also work with RFID-X sewn-in labels.
Send us a photo of your entrance
Add the entrance width and the tags you use now, and we'll tell you which technology and how many pedestals you need.